Bio-Clean Instructions, from the insert that comes inside the 2 pound jar of Bio clean

Home Drains

Totally blocked pipe: Get the drain to take water using a plunger or cable. Then follow instructions on label. If it cannot be cabled, add 1 Tbsp. in 1 pint of water each day. Use a plunger daily. Since the bacteria must eat through the length of the blockage this could take days or even weeks (but that's better then replacing your pipes)

If extended treatment and plunging don't restore full flow, some inorganic matter (e.g. a toy, glass, toothbrush or bobby pins) is in the line and will have to be removed manually.

When garbage disposal, dishwasher or washing machine is connected to a septic tank and system one Tbsp. of bioclean in one pint of  warm (not hot) water should be added each week to each of these drains.

Very hard water causes slime in toilet tanks. To eliminate, add two Tbsp. directly in to the tank as needed. But do not flush for several hours.

Garbage Disposal Odors

Mix 1 Tablespoon of Bio Klean with 1 pint of warm (not hot ) water. Turn on the garbage disposal, dump mixture into disposal and immediately turn the garbage disposal off, and do not use or run water down the disposal for several hours. Repeat as needed.

Septic tanks and cesspools

Initial treatment

From the chart bellow determine the amount of bio-clean you will need for your septic tank or cesspool. Each week for four weeks add product to toilet and flush. After initial treatment you can simply use the pre measured packets in the Bio-Clean septic treatment packs, and just flush one down any toilet once a month, you also get the refrigerator magnet that reminds you it's time for another treatment.

Maintenance Treatments

Add 1 cup of bio kleen monthly, just pour it down the toilet and flush, or get the bio-Clean septic treatment packets with the blinking eyes refrigerator magnet. each kit comes with 12 packets for 1 year of worry free maintenance.

Special cases 

If you have backups, pudding or odors you may need to pump your septic tank before adding bio clean. Check your tank. If it has hard crust more then six inches this or more then 12 inches of build up on the bottom, pump first. Break up the crusts less then 6 inches and slosh initial treatment over the top.

Wait about 2 to 3 weeks after each pumping before adding bioclean.

Many household products kill the bacteria your system must have.

For more information and instructions, please call me, you will not get an automated answering service, You will get a real live person (ME) I try to answer all calls myself, but sometimes you will get my answering machine, but leave a message and I will call you back

1-252-492-0017